| |
|
|
|
1. Is your driveway
muddy?
2. Are you tracking dirt in to the house?
·
·
These are just a few of the problems that can
arise during the springs months.
Choosing an asphalt surface for your driveway is practical, yet
inexpensive.
We are fully independent, crushing our own
aggregate, and manufacturing our own asphalt.
Asphalt Paving can be divided
into two categories, New Paving and Resurfacing.
New Paving:
New Paving is the building of new asphalt
surfaces. First, excavation and grading of the area is done to establish the
desired grade and drainage. Then a base of aggregate is placed and compacted.
Finally, a specifically designed asphalt hot mix is applied to present a
finished surface based on the customer's needs. Also under this category would
be Removal and Replacement of existing asphalt. If the asphalt has deteriorated
from a lack of maintenance, overuse, or simply living past its life expectancy.
In this case, old asphalt pavement will need to be removed and replaced. If
needed, this would be when more base stone or base hot mix could be added before
applying a new layer of surface asphalt.
Resurfacing:
When an asphalt pavement surface deteriorates to
the point of needing repair, an asphalt resurfacing is an effective solution. A
standard asphalt resurfacing consists of a new layer of surface asphalt applied
over the existing asphalt surface. The thickness of the new surface is
determined by the amount of traffic as well as individual customer's needs. The
existing asphalt surface may need to be patched before the resurfacing to fix
any area that needs replaced.
./o:p>
|
|
|
|
|
